Leopard 38 (Florida)

Presented By Cynthia @ The Multihull Company

41 Photos Contact Catamaran Broker Add to Watchlist
Asking: $285,000 (USD) Location: Fort Lauderdale, FL, US (Florida)
S/V Rua Honu is a Fort Lauderdale, FL, US based 2010 Leopard 38 Catamaran For Sale By Broker
This catamaran owner requires financial settlement only. No trades.
Responses to inquiries may come from a broker, and this sale may include brokerage fees.

Rua Hona has just arrived to Fort Lauderdale. She is a beautifully maintained Owners version Leopard 38.

The highly sought after 3-Cabin Owners Version is focused on performance, comfort and offering an abundance of outdoor space. With her generous sail plan and hull design, Rua Hona is highly practical and easy-to-use. Inside, comfort as ever remains a top priority.

Generous headroom throughout, plus substantial storage capacity as a result of under-bunk lockers in each cabin gives even more space for onboard relaxation.

The exterior of Rua Hona is equally well thought out, with a large cockpit hardtop providing excellent shade and weather protection and a powerboat-style stepped transom enabling easier boarding. The vertical front windscreens give superb panoramic visibility, more effective use of interior volume as well as sun protection.

Rua Hona had various updates from 2021-2024.

Specifications
Catamaran Name:S/V Rua Honu
Model:38
Year Built:2010
Builder:Robertson And Caine
Designer:Morrelli and Melvin
Loa:38 ft
Lwl:36 ft ft
Beam:19' 9"
Draft:3' 5"
Displacement:20,120 lbs/9,105kg
Mast Height:62' 8"
Speed:Cruising Speed: 7 knots @ 2800 RPM; Max Speed: 8 knots @ 3600 RPM)
Fuel Tanks:1 (92 Gallons)
Water Tanks:1 (92 Gallons)
Cabins:3
Heads: 2
Engines:2 x Yanmar 3YM30 19 HP

Catamaran Inventory

SPECS

  • Keel: Other

MEASUREMENTS

  • Length Overall: 38 ft
  • Length Waterline: 36 ft ft
  • Max Draft: 3' 5"
  • Bridge Clearance Measure: 62' 8"
  • Beam Measure: 19' 9"

ENGINE(S)

  • Total Power: 38
  • Engine Type: Inboard
  • Engine/Fuel Type: Diesel
  • Engine Power: 19 hp
  • Total Power: 38
  • Engine Type: Inboard
  • Engine/Fuel Type: Diesel
  • Engine Power: 19 hp

2024

  • Sail drives fully reconditioned including new seals and zincs
  • New Vitrifrigo fridge/freezer
  • Trampoline reconditioned (perimeter banding)
  • Full, two coat anti-fouling bottom prep & paint
  • Bird protection at mast
  • Full rigging inspection – all good.
  • Reconditioned water maker with new piping, parts and filters.
  • Full lube service on sail drives, both engines, and generator. New fuel filters throughout.
  • Replaced pump & thru hull valve for air conditioning.
  • Installed new helm wheel wrap
  • Replaced shower drain pump.
  • Replace trim for shower head.

2023

  • Replaced Yanmar 3YM30 starboard engine with new
  • New flush units for both heads
  • New 3.5 hp Suzuki motor for tender

2022

  • All new Raymarine electronic equipment: Radar dome & display, chart plotter/ fish finder & thru-hull transducer, autopilot, wind vane & transducer
  • All new windows in salon
  • New Magnum charger/inverter unit
  • Full, detailed rigging inspection – replaced questionable standing & running rigging and lifeline parts.
  • All new rub rail (waterline and Bimini top)
  • New stainless steel propane grill and replaced propane line and valve with new.
  • Stripped & refinished mahogany BBQ counter and epoxy coated. Added solid surface top.
  • Replaced 200 gal fresh water tank with new.
  • Replaced anchor rode with all galv. chain – 250
  • Replaced 3 hatch lids.
  • Replaced both props with new ones.
  • Sails & stack pack (mainsail cover) fully reconditioned as follows:
  • MAINSAIL
  • New edgings at luff & leach
  • Repair torn flap over end of batten pockets
  • Replace tell tales
  • Restitch head webbings
  • JIB
  • Restitch UV cover
  • Repair luff tape at top & bottom
  • STACK PACK – MAINSAIL COVER
  • Replace all 3 zippers
  • New head cap
  • Repair foot rope
  • Repair minor tears

2021

  • New ProFurl roller furler for Genoa and new mainstay.
  • Replaced plumbing trim and plumbing at galley sink
  • Replaced two 30 amp shore power cords and 50 amp splitter with new.
  • Replaced tender winch lift line with new.
  • Replaced anchor windless controller with new
  • Replaced low and high speed foot control switches for power winch with new.

Tender

  • 2021 10′ Lammina UL aluminum hull, inflatable PVC body (5 6 beam) with a 2023 2.5 hp Suzuki outboard

Catamaran Photos

Cynthia @ The Multihull Company

By Cynthia @ The Multihull Company

Cynthia delivers lasting value for her clients as a genuine sailboat specialist. Her vast racing and cruising resumé bears a depth of knowledge that creates a winning connection. Cynthia says, “Some people come to the buying process with next-to-no experience, while others are extremely qualified cruisers looking for their next-level boat. Having a broad spectrum of experience helps me draw out and achieve all the finer points of what my clients are looking for.”